Casing shrink casing
Food packaging shrink wrap film (bag)
- Suggest overfilling 5-10% to avoid wrinkles on the surface of sausages (when stored at temperatures below zero, leave at room temperature for 24 hours before opening the packaging).
- Usage temperature: The product belongs to the low-temperature film category, and the usage temperature is less than 100 ℃
- Product Usage: The product is disposable and packaged in meat products for food use.
- Storage conditions: Please place in a clean, dry, and odorless environment, prevent sunlight exposure, and avoid being pressed under heavy objects or colliding with hard objects.
- Product description: Product name: Food packaging shrink wrap film (bag)
Material: PA · PE
Shelf life: One year
Product Usage: The product is disposable and packaged in meat products for food use.
Usage temper
-
-
Product name: Food packaging shrink wrap film (bag)
Material: PA · PE
Shelf life: One year
Product Usage: The product is disposable and packaged in meat products for food use.
Usage temperature: The product belongs to the low-temperature film category, and the usage temperature is less than 100 ℃
Usage/environment of shrink fit products: The product has undergone sterilization and disinfection treatment before leaving the factory. Do not soak in water before use, especially important as soaking in water can cause product contamination and also affect product size.
Suggest overfilling 5-10% to avoid wrinkles on the surface of sausages (when stored at temperatures below zero, leave at room temperature for 24 hours before opening the packaging).
Storage conditions: Please place in a clean, dry, and odorless environment, prevent sunlight exposure, and avoid being pressed under heavy objects or colliding with hard objects. The ambient temperature should not exceed 25 ℃, the relative humidity should not exceed 75%, and it should be used up at once after opening the box.
Compliance with regulations/standards: The product complies with the requirements of relevant regulations and standards such as GB4806.1 and GB4806.7.
The use of resin complies with the requirements of GB4806.6, and the use of additives complies with the requirements of GB9685 and relevant announcements.
The product is produced according to GB31603.